From tile adhesive to self-leveling and gypsum board — the right additive, the right dosage, the right result. Pick your system below.
Each system benefits from a different additive grade. We tune the combination to your mix and climate.
Powdered PCE (P550/P560/P570) for open time & slip resistance; SiC088 for a smooth bed.
PCE for flow and compaction; SiC088 knocks out bubbles for a dense, stain-resistant joint.
P600/P700 liquid for pumpable flow; SiC088 for a pinhole-free, dense surface.
PCE for workability; R200 retarder for controlled set in board, blocks and plaster.
Powdered PCE + L400 rheology modifier for spreadability, anti-sag and open time.
PCE for high strength at low water; SiC088 for a clean, void-free repair face.
Benchmarks our engineers use — we fine-tune from here for your binder and climate.
| Water reducer | P550 / P560 powdered PCE, 0.05–0.5% |
|---|---|
| Defoamer | SiC088, 0.1–0.5% where bubbles appear |
| Hot climate | Switch to P570 for slump retention |
| Water reducer | P600 liquid (40%), 0.2–1.0% by weight |
|---|---|
| Defoamer | P700 liquid (50%) or SiC088 powder |
| Goal | Flow + dense, pinhole-free surface |
Tell us your application and binder. We'll specify the grade and dosage — free of charge.
